Step 1
Use PPR CUTTER to cut the pipe, and the cut should be smooth and free of burrs
Step 2
Clean the welding parts of pipes and fittings to avoid sand, dust, and other damage to the quality of the joints.
Step 3
choose right size welding head and heated to 260°C.
Step 4
Mark the weld depth on the pipe
Step 5
At the same time, the pipe and pipe fittings are inserted into the fusion splicer and heated according to the specified time.
Step 6
After heating, push the pipe and pipe fittings vertically and maintain them for more than 5 seconds, not too hard to prevent bending.
