1. Compared with the traditional hot water pipe, the thermal insulation performance is improved by 5-8 times. PPR insulation pipe adopts plastic plastic PPR hot water core tube + polyurethane foam insulation layer +PVC coat protection layer, three layers tightly closed, no gaps in the middle, no air layer, good insulation effect. Compared with ordinary insulation pipe, it is easy to dissipate heat; Ordinary thermal insulation pipe is wrapped with PVC water pipe or rubber plastic cotton or PEF cotton, which is easy to dissipate heat, has poor thermal insulation effect, and cannot be kept at constant temperature for a long time.
2. It is easy to install without further processing and insulation, saving 80% of labor cost. It can be installed directly without on-site insulation when leaving the factory, so as to speed up the project progress, save at least 2-3 people and labor cost. Compared with the secondary insulation construction, the cost increases and the quality is difficult to control; The traditional insulation pipe needs to be insulated on the construction site, and a project needs at least 3-5 people to complete. In addition to the labor cost, the whole project basically does not make money, so it is busy in vain.
3. The thickness of insulation layer can be adjusted at will according to requirements. PPR insulation pipe can customize different degrees of insulation layer according to the climate difference between North and south, which is commonly used in various fields. Compared with ordinary insulated water pipe, the fixed thickness; The thermal insulation layer of ordinary thermal insulation water pipe is only 3mm-5mm, which is extruded and foamed by plastic, which can not achieve the thermal insulation effect.
